Product specifications
TRINAMIC TMCM-343-H-TMCL
3-axis controller/driver module 1.1A, 34V horizontal pin connector (standard)
The TMCM-343 is a compact and versatile triple axis 2-phase stepper motor controller and driver module. It provides a complete motion control solution at a very small size for embedded applications. Using the integrated additional I/Os it even can do complete system control applications. The board can be connected to a baseboard or customized electronics with a pin connector. The TMCM-343-TMCL comes with the PC based software development environment TMCL-IDE. Using predefined TMCL™ (Trinamic Motion Control Language) high level commands like "move to position" or "constant rotation" rapid and fast development of motion control applications is guaranteed. Host communication is possible via the serial UART interface (e.g. using a RS-232 or RS-485 level shifter) or via CAN. A user TMCL program can be stored in the on board EEPROM for stand-alone operation. With the TMCM-343-CANopen it is possible to operate the module in CANopen networks together with other equipment. All time critical operations, e.g. ramp calculation are performed on board. With the stallGuard™ feature it is possible to detect overload and stall of the motor. The firmware of the module can be updated via the serial interface.
Specifications:
- Interfaces: CAN, UART
- No. Axes: 3
- Phase Current, RMS: 1.1A
- Phase Current, peak: 1.5A
- Product State: active
- RDSon HS: 220mΩ(2)
- RDSon LS: 120mΩ(1)
- Microstep Resolution: 1...64
- Supported Motor Type: Stepper
- Velocity Ramps: trapezoidal
- stallGuard™
- Logic Supply: 5V
- Motor Supply: 7...34V
- Length: 80mm
- Width: 50mm
- TRINAMIC Motion Control product -
