Product specifications
Attend 213A-11CAA-R
RJ45 Jack Magnetic Type Bottom Latch w/LED 1x1 Port
CHARACTERISTICS
RJ 45 10/100 Base-Tx Transformer Jack With Transformer
Impedance Resistor / High Voltage Capacitor.
Size Same As RJ-45 Modular Jack to Save PCB Space.
Reduce EMI Radiation, Improve EMI Performance.
Designed for Network Interface Card ASpplication.
Designed to Meet IEEE 802.3u Requirement.
Designed for 100 Base Transmission over UTP-5 Cable.
ELECTRICAL
Insertion Loss: 1-100MHz -1.0 dB Max.
1-30MHz -18dB Min. Load 100 Ohms
Return Loss: 30-80MHz -12dB Min. Load 100 Ohms
Cross Talk: 30MHz – 40dB Typ.
60MHz – 35dB Typ.
100MHz – 30dB Typ.
CMRR: 1-50MHz – 30dB Typ.
50-130MHz -20dB Typ.
Turn Ratios: RX=1:1(+/-3%) TX=1:1(+/-3%)
Isolation 60Hz: Input to Output 1500Vrms, 60 Seconds
Primary Inductance: @100KHz 0.1Vrms.8mA DC Bias 350uH Min.
MECHANICAL
Housing Material: High Temp. UL94V-0.
Contact Material: Phosphor Bronze t=0.35mm
Plating: Gold Plating over Nickel.
Operating Life:750 Cycles Min.
PCB Retention Pre-Solder: 1 LB Min.
PCB Retention Post-Solder: 10 LBS Min.
ENVIRONMENTAL
Storage Temperature: -40°C to +85°C
Operation Temperature:0°C to +70°C
Wave Soldering Temperature: 230°C~250°C(3~5 Seconds)
Mates with Modular Plug Conforming to FCC Part 68, Subpart F.
- Attend Technology product -
