Product specifications
WuT 11120
Wall mount housing, enclosure rating IP66 / IP67
The IP wall mount enclosure is ideal for outdoor use or in spaces which are especially subject to moisture and/or dust. The special form factor makes it usable for W&T devices in the DIN rail housing.
Installing devices outdoors or in rooms with humidity and/or dust requires the use of additional protective enclosures, since these protect the electronics from environmental effects.
The polycarbonate enclosure is provided with a pre-installed 35mm support rail. The cable glands are available as separate accessories, since each application will have different requirements. Note that a cable gland is available which allows a network cable to be inserted into the housing without field-assembly of the RJ45 connector.
The unusual installation height of the enclosure with a dimension of 180mm also makes it easy to install serial W&T devices with threaded-on SUB-D connectors.
Product properties:
Housing for outdoor use appropriate for W&T devices in DIN rail mount housing
Dimension: 180x130x175mm
With integrated 35mm support rail
Pre-stamped holes in lower housing section are provided for easy cable fitting installation (M12-M32)
Wide range of cable glands and sealing accessories available
Technical data:
Standards:
- Enclosure rating (EN 60529): IP66 / IP67
- NEMA classification: NEMA 1, 4, 4X, 6
- Fire rating: UL 94 5V
- Impact resistance (EN 62262): IK 08
- UV resistance: UL 508
- Halogen-free (DIN/VDE 0472, Part 815): yes
Material:
- Body and cover: polycarbonte
- Cover screw material: Nylon
- Sealing material: TPE
Color:
- Lower section: RAL 7035
- Cover: Transprent, smoke-gray
- Cover screws: black
Other data:
- Housing operating temperature: Continuous: -40..+80°C, Short-time: -40..+120°C
- Weight: approx. 600 g
- Dimensions: 180 x 130 x 175 mm, Dimensional drawing in PDF format
- Scope of delivery: IP housing with integrated DIN rail
- Wiesemann & Theis product -
