Product specifications
HP206CW
The HP206CW employs a MEMS pressure sensor with an I2C interface to provide accurate Temperature, Pressure or Altitude data. The sensor Pressure and Temperature outputs are digitized by a high resolution 24-bit ADC. The Altitude value is calculated by a specific patented algorithm according to the pressure and temperature data. Data compensation is integrated internally to save the effort of the external host MCU system.
Easy command-based data acquisition interface and programmable interrupt control is available. Typical active supply current is 5.3 μA per measurement-second while the ADC output is filtered and decimated by 256. Pressure output can be resolved with output in fractions of a Pascal, and Altitude can be resolved in 0.1 meter. The HP206C is offered in a 6.3 mm x 6.8 mm x 3.0 mm package and specified for operation from -40°C to 85°C.
Features;
- 1.8V to 3.6V Supply Voltage
- Fully Compensated Internally
- Command-based Reading, Compensated (Optional)
- Pressure: 20-bit Measurement (Pascals)
- Altitude: 20-bit Measurement (Meters)
- Temperature: 20-bit Measurement (°Celsius)
- Configurable ADC Decimation Rate via Commands
- Programmable Events and Interrupt Controls
- Altitude Resolution down to 0.1 meter
- I²C interface
- Waterproof Design
Application;
- High Accuracy Altimetry
- Smartphones / Tablets
- Personal Electronics Altimetry
- GPS Dead Reckoning
- GPS Enhancement for Emergency Services
- Map Assist, Navigation
- Weather Station Equipment
- Hope RF -
